Ordering a vault door is a one-time purchase for most buyers — there's no room to guess wrong on size or grade once it's anchored into a wall. Here's what actually determines the right choice, in order of what to check first.

1. Start With What You're Protecting, Not the Door Itself

The grade you need is set by the insurance cash/valuables cover you require, not by "how secure do I want to feel." Ask your insurer or broker for the required cash-rating first — that number maps directly to an EN 1143-1 grade (I through V and above), and it's the single biggest factor in price and door weight.

  • Grade I (EVD): Lower cash cover — cash offices, panic rooms, general secure storage.
  • Grade III–V (AVD): Higher cash cover — jewelry vaults, bank branches, high-value storage. Our Valberg AVD5 (Grade V) sits at this tier.
2. Measure the Wall Before the Door

The door's frame depth has to match your wall thickness, or you're paying for custom frame extensions later. Before ordering:

  • Confirm wall thickness at the exact point the door will sit (not an average — walls vary near corners and openings).
  • Check for concrete reinforcement already in place — higher-grade doors need a wall structure rated to match, not just a door bolted onto a standard wall.
  • Measure the rough opening width and height with margin for the frame, not just the door leaf size.
3. Match Opening Direction to the Room Layout

Vault doors typically open outward via external hinges, usually to around 180°. Before ordering, check:

  • Which side of the room has clearance for the door swing.
  • Whether the room needs the door recessed flush or proud of the wall.
  • Access for anyone entering with equipment (trolleys, cash boxes) — swing direction affects workflow more than people expect.
4. Decide on Lock Type Up Front

Retrofitting a lock upgrade after installation is far more expensive than specifying it at order time.

  • Grade I doors typically ship with a single key lock; electronic upgrades (dual code, time-delay, lockout after failed attempts) are available as options.
  • Grade III–V doors typically use two key locks as standard, with mechanical or electronic upgrade paths.

If multiple staff need independent access logs, decide on electronic locking before ordering — not after.

5. Confirm Delivery and Anchoring Logistics Early

Vault doors in the AVD range weigh 700+ kg. Before you order, confirm:

  • Ground floor or upper floor installation — upper floors may need structural sign-off before a heavy door is approved.
  • Access route into the building (door width, corridor turns, lift capacity if not ground floor).
  • Anchoring method compatible with your wall material.
FAQ

What size vault door do I need?
It depends on the rough opening and wall thickness you're working with, not a standard size — measure the exact opening and wall depth before ordering, and confirm frame depth compatibility.

Can I upgrade a Grade I door to Grade V later?
No — the grade is tied to the door and wall system as installed. If you might need higher cover in future, it's more cost-effective to specify the higher grade upfront than to replace the door later.

How long does delivery and installation take in Saudi Arabia?
Delivery is nationwide across Riyadh, Jeddah, and Al Khobar; timelines depend on stock availability and site readiness — contact us to confirm current lead times for your grade and location.